1.2.0.19 2 http://grolabupdate.opengrow.pt/firmware/powerbot/PowerBotFirmware_H002_1.2.0.19.hex PowerBotFirmware_H002_1.2.0.19.hex 3A63CA0AC756FB7312BC1CDACF0FB6FC v1.2.0.19 (2023-06-28): - Improved commands handling; - Change default communication channel to 5 upon factory reset command; - Other minor changes and improvements. v1.2.0.18 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), PowerBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.2.0.16 (2020-07-24): - Fixed enabling/disabling interrupts. v1.2.0.15 (2020-07-13): - Improved relay triggering time; - Improved DHT sensor block detection and implemented measures to re-initialize the sensor; - Improved zero-cross management. v1.2.0.14 (2020-04-17): - Added constraints to the Temperature and Humidity sensor to reduce/remove potential false readings; - Added constraints to the Internal Temperature sensor to reduce/remove potential false readings; - Fixed a minor bug related to the device's cool-down time. v1.2.0.13 (2020-01-23): - Updated compiler (reduced memory usage and code space); - Fixed incoherences with the cool-down timer; - Implemented a new library to handle the temperature/humidity sensor sampling, this library is more reliable and should prevent sampling from blocking; - Other minor fixes and improvements. v1.2.0.11 (2019-10-28): - Fixed cool-down timer from output 1 affecting output 4; - Implemented a method to prevent a block on the temperature/humidity reading operation. v1.2.0.10 (2019-03-26): - Skipped versions 1.2.0.8 and 1.2.0.9; - Preparations for the new feature to control the modules’ LED; - Communication channel will reset to default if it gets out of bounds (1 to 5); - Improved temperature sampling. v1.2.0.7 (2017-12-05): - Implemented independent device Security Cooldown time to prevent rapid switching in sensitive devices (ex. HPS); - Improved module registration process; - Other minor fixes and improvements. v1.2.0.3: - Added security action when PowerBot loses communication with GroNode for a while. v1.2.0.2: - Improved humidity and temperature measuring delay; - Other minor improvements. 1.3.0.19 3 http://grolabupdate.opengrow.pt/firmware/powerbot/PowerBotFirmware_H003_1.3.0.19.hex PowerBotFirmware_H003_1.3.0.19.hex BCA4FF5AD0704D798247769F51F4303C v1.3.0.19 (2023-06-28): - Improved Combined CO2 Sensor handling; - Improved commands handling; - Change default communication channel to 5 upon factory reset command; - Other minor changes and improvements. v1.3.0.18 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), PowerBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved Combined CO2 Sensor handling; - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.3.0.16 (2020-07-24): - Fixed enabling/disabling interrupts. v1.3.0.15 (2020-07-13): - Improved relay triggering time; - Improved DHT sensor block detection and implemented measures to re-initialize the sensor; - Improved zero-cross management. v1.3.0.14 (2020-04-17): - Added constraints to the Temperature and Humidity sensor to reduce/remove potential false readings; - Added constraints to the Internal Temperature sensor to reduce/remove potential false readings; - Fixed a minor bug related to the device's cool-down time; - Implemented status LED commands/settings. v1.3.0.13 (2020-01-23): - Updated compiler (reduced memory usage and code space); - Fixed incoherences with the cool-down timer; - Improved switch and flood sensing; - Implemented a new library to handle the temperature/humidity sensor sampling, this library is more reliable and should prevent sampling from blocking; - Other minor fixes and improvements. v1.3.0.11 (2019-10-28): - Fixed cool-down timer from output 1 affecting output 4; - Implemented a method to prevent a block on the temperature/humidity reading operation. v1.3.0.10 (2019-03-26): - Preparations for the new feature to control the modules’ LED; - Communication channel will reset to default if it gets out of bounds (1 to 5); - Improved temperature sampling. v1.3.0.9 (2018-10-24): - Improved the Temperature and Humidity Sensor reading operation; - CO2 preparation code. v1.3.0.8 (2018-10-01): - Implemented system to retrieve values from CO2 Combined Sensor (CO2, Temperature, Humidity, Luminosity and Atmospheric Pressure); - Changed the behavior of serial port, to access PowerBot regular options through serial port it is required to enable the configuration mode; - Other minor improvements and fixes. v1.3.0.7 (2018-09-14): - First firmware release for this hardware version; - Implemented independent device Security Cooldown time to prevent rapid switching in sensitive devices (ex. HPS); - Improved module registration process; - Other minor fixes and improvements. 1.4.0.19 4 http://grolabupdate.opengrow.pt/firmware/powerbot/PowerBotFirmware_H004_1.4.0.19.hex PowerBotFirmware_H004_1.4.0.19.hex DFB86D7FAC66C112BB7B814496DBC552 v1.4.0.19 (2023-06-28): - Improved Combined CO2 Sensor handling; - Improved commands handling; - Change default communication channel to 5 upon factory reset command; - Other minor changes and improvements. v1.4.0.18 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), PowerBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved Combined CO2 Sensor handling; - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.4.0.16 (2020-07-24): - Fixed enabling/disabling interrupts. v1.4.0.15 (2020-07-13): - Improved relay triggering time; - Improved DHT sensor block detection and implemented measures to re-initialize the sensor; - Improved zero-cross management. v1.4.0.14 (2020-04-17): - Added constraints to the Temperature and Humidity sensor to reduce/remove potential false readings; - Added constraints to the Internal Temperature sensor to reduce/remove potential false readings; - Fixed a minor bug related to the device's cool-down time; - Implemented status LED commands/settings. v1.4.0.13 (2020-01-23): - Updated compiler (reduced memory usage and code space); - Fixed incoherences with the cool-down timer; - Improved switch and flood sensing; - Implemented a new library to handle the temperature/humidity sensor sampling, this library is more reliable and should prevent sampling from blocking; - Other minor fixes and improvements. v1.4.0.11 (2019-10-28): - Skipped version 1.4.0.10; - Fixed cool-down timer from output 1 affecting output 4; - Implemented a method to prevent a block on the temperature/humidity reading operation. v1.4.0.9 (2019-05-28): - Initial release. 1.5.0.19 5 http://grolabupdate.opengrow.pt/firmware/powerbot/PowerBotFirmware_H005_1.5.0.19.hex PowerBotFirmware_H005_1.5.0.19.hex 524F250E0E046A44014F6471DF95DEDC v1.5.0.19 (2023-06-28): - Improved Combined CO2 Sensor handling; - Improved commands handling; - Change default communication channel to 5 upon factory reset command; - Other minor changes and improvements. v1.5.0.18 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), PowerBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved Combined CO2 Sensor handling; - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.5.0.16 (2020-07-24): - Fixed enabling/disabling interrupts. v1.5.0.15 (2020-07-13): - Improved relay triggering time; - Improved DHT sensor block handling and the re-initialization of the sensor; - Improved zero-cross management. v1.5.0.14 (2020-04-17): - Added constraints to the Temperature and Humidity sensor to reduce/remove potential false readings; - Added constraints to the Internal Temperature sensor to reduce/remove potential false readings; - Fixed a minor bug related to the device's cool-down time; - Implemented status LED commands/settings. v1.5.0.13 (2020-01-23): - Initial release for PowerBot hardware 5; - Updated compiler (reduced memory usage and code space); - Fixed incoherences with the cool-down timer; - Improved switch and flood sensing; - Implemented a new library to handle the temperature/humidity sensor sampling, this library is more reliable and should prevent sampling from blocking; - Other minor fixes and improvements. 1.6.0.19 6 http://grolabupdate.opengrow.pt/firmware/powerbot/PowerBotFirmware_H006_1.6.0.19.hex PowerBotFirmware_H006_1.6.0.19.hex F98ECE5BC1F7F69BBF065CA5AB0E89E3 v1.6.0.19 (2023-06-28): - Improved Combined CO2 Sensor handling; - Improved commands handling; - Change default communication channel to 5 upon factory reset command; - Other minor changes and improvements. v1.6.0.18 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), PowerBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved Combined CO2 Sensor handling; - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.6.0.16 (2020-08-11): - Initial release for PowerBot Hardware 6. 1.7.0.19 7 http://grolabupdate.opengrow.pt/firmware/powerbot/PowerBotFirmware_H007_1.7.0.19.hex PowerBotFirmware_H007_1.7.0.19.hex 5540C400AF064BCDE0FD7E63E3C7AD1F v1.7.0.19 (2023-06-28): - Improved Combined CO2 Sensor handling; - Improved commands handling; - Change default communication channel to 5 upon factory reset command; - Other minor changes and improvements. v1.7.0.18 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), PowerBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved Combined CO2 Sensor handling; - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.7.0.16 (2020-08-11): - Initial release for PowerBot Hardware 7. 1.8.0.19 8 http://grolabupdate.opengrow.pt/firmware/powerbot/PowerBotFirmware_H008_1.8.0.19.hex PowerBotFirmware_H008_1.8.0.19.hex 4B56A090EB7FDCFFC284EA3D5D456EEE v1.8.0.19 (2023-06-28): - Improved Combined CO2 Sensor handling; - Improved commands handling; - Change default communication channel to 5 upon factory reset command; - Other minor changes and improvements. v1.8.0.18 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), PowerBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved Combined CO2 Sensor handling; - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.8.0.16 (2020-08-11): - Initial release for PowerBot Hardware 8. 1.8.0.15 8 http://grolabupdate.opengrow.pt/firmware/tankbot/TankBotFirmware_H008_1.8.0.15.hex TankBotFirmware_H008_1.8.0.15.hex D64868B1AFF4DC82FC4A9D4735F13306 v1.8.0.15 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), TankBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.8.0.14 (2020-04-17): - Added constraints to the Temperature sensor to reduce/remove potential false readings; - Fixed a minor bug related to the device's cool-down time. v1.8.0.13 (2020-01-23): - Updated compiler (reduced memory usage and code space); - Fixed incoherences with the cool-down timer; - Other minor fixes and improvements. v1.8.0.11 (2019-08-01): - Improved the water temperature sampling; - Improved the pH and EC sampling; - Improved manual buttons and universal switch inputs sampling; - Improved manual buttons handling. v1.8.0.10 (2019-03-26): - Skipped version 1.8.0.9; - Preparations for the new feature to control the modules’ LED; - Communication channel will reset to default if it gets out of bounds (1 to 5); - Improved temperature sampling. v1.8.0.8 (2017-12-05): - Implemented independent device Security Cooldown time to prevent rapid switching in sensitive devices (ex. HPS); - Improved module registration process; - Other minor fixes and improvements. v1.8.0.4: - Fixed calibration commands issues. v1.8.0.3: - Added security action when TankBot loses communication with GroNode for a while. v1.8.0.2: - Minor improvements and fixes. 1.9.0.15 9 http://grolabupdate.opengrow.pt/firmware/tankbot/TankBotFirmware_H009_1.9.0.15.hex TankBotFirmware_H009_1.9.0.15.hex 82966B6098E77C5F94DA2826A89264B6 v1.9.0.15 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), TankBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.9.0.14 (2020-04-17): - Added constraints to the Temperature sensor to reduce/remove potential false readings; - Fixed a minor bug related to the device's cool-down time. v1.9.0.13 (2020-01-23): - Updated compiler (reduced memory usage and code space); - Fixed incoherences with the cool-down timer; - Other minor fixes and improvements. v1.9.0.11 (2019-08-01): - Improved the water temperature sampling; - Improved the pH and EC sampling; - Improved manual buttons and universal switch inputs sampling; - Improved manual buttons handling. v1.9.0.10 (2019-03-26): - Preparations for the new feature to control the modules’ LED; - Communication channel will reset to default if it gets out of bounds (1 to 5); - Improved temperature sampling. v1.9.0.9 (2018-06-01): - Improved switch sensing; - Removed unnecessary debug messages; - Minor fixes and improvements. v1.9.0.8 (2017-12-05): - Implemented independent device Security Cooldown time to prevent rapid switching in sensitive devices (ex. HPS); - Improved module registration process; - Other minor fixes and improvements. 1.10.0.15 10 http://grolabupdate.opengrow.pt/firmware/tankbot/TankBotFirmware_H010_1.10.0.15.hex TankBotFirmware_H010_1.10.0.15.hex E34E5A3D64684EF336F57016F1888911 v1.10.0.15 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), TankBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.10.0.14 (2020-04-17): - Added constraints to the Temperature sensor to reduce/remove potential false readings; - Fixed a minor bug related to the device's cool-down time. v1.10.0.13 (2020-01-23): - Updated compiler (reduced memory usage and code space); - Fixed incoherences with the cool-down timer; - Other minor fixes and improvements. v1.10.0.11 (2019-03-26): - Improved the water temperature sampling; - Improved the pH and EC sampling; - Improved manual buttons and universal switch inputs sampling; - Improved manual buttons handling. v1.10.0.10 (2019-03-26): - Preparations for the new feature to control the modules’ LED; - Communication channel will reset to default if it gets out of bounds (1 to 5); - Improved temperature sampling. v1.10.0.9 (2018-06-01): - Initial release. 1.11.0.15 11 http://grolabupdate.opengrow.pt/firmware/tankbot/TankBotFirmware_H011_1.11.0.15.hex TankBotFirmware_H011_1.11.0.15.hex 310CDE062CDE5FA935CE776A465F4070 v1.11.0.15 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), TankBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.11.0.14 (2020-08-17): - Initial release for TankBot Hardware 11. 1.20.0.15 20 http://grolabupdate.opengrow.pt/firmware/tankbot/TankBotFirmware_H020_1.20.0.15.hex TankBotFirmware_H020_1.20.0.15.hex 6ED914F4FA7B94418BAAAC49E9566A9E v1.20.0.15 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), TankBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.20.0.14 (2020-12-09): - Initial release for TankBot Plus (TankBot Hardware 20). 1.2.0.14 2 http://grolabupdate.opengrow.pt/firmware/soilbot/SoilBotFirmware_H002_1.2.0.14.hex SoilBotFirmware_H002_1.2.0.14.hex 9D622F6B96415A1B4B752033BADBB3DE v1.2.0.14 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Changed default sampling moisture time to 10 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.2.0.13 (2020-08-06): - Improved analog reference; - Implemented status LED commands/settings; - Fixed temperature blockage due to variation verification. v1.2.0.12 (2020-04-17): - Added constraints to the Temperature sensor to reduce/remove potential false reading. v1.2.0.11 (2020-01-22): - Updated compiler (reduced memory usage and code space); - Other minor fixes and improvements. v1.2.0.10 (2019-03-26): - Skipped versions 1.2.0.8 and 1.2.0.7; - Preparations for the new feature to control the modules’ LED; - Communication channel will reset to default if it gets out of bounds (1 to 5); - Improved temperature sampling. v1.2.0.7 (2017-12-05): - Improved module registration process; - Other minor fixes and improvements. 1.3.0.14 3 http://grolabupdate.opengrow.pt/firmware/soilbot/SoilBotFirmware_H003_1.3.0.14.hex SoilBotFirmware_H003_1.3.0.14.hex 1EDFA63AD571AD94F584AF4F737D5E7C v1.3.0.14 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Changed default sampling moisture time to 10 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.3.0.13 (2020-08-06): - Improved analog reference; - Implemented status LED commands/settings; - Fixed temperature blockage due to variation verification. v1.3.0.12 (2020-04-17): - Added constraints to the Temperature sensor to reduce/remove potential false reading. v1.3.0.11 (2020-01-22): - Initial release for SoilBot hardware 3; - Updated compiler (reduced memory usage and code space); - Moisture sample times are now independent both on sampling and calibration; - Other minor fixes and improvements. 1.40.0.20 40 http://grolabupdate.opengrow.pt/firmware/other-modules/powerbot/PowerBotFirmware_H040_1.40.0.20.hex PowerBotFirmware_H040_1.40.0.20.hex 7FC0C725B12BEC9459395B4121E79FEA v1.40.0.20 (2024-06-05): - Initial release. 1.8.0.15 8 http://grolabupdate.opengrow.pt/firmware/other-modules/tankbot/TankBotFirmware_H008_1.8.0.15.hex TankBotFirmware_H008_1.8.0.15.hex A12819672C56EDE65D67D1F8C3466DC4 v1.8.0.15 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), TankBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.8.0.14 (2020-04-17): - Added constraints to the Temperature sensor to reduce/remove potential false readings; - Fixed a minor bug related to the device's cool-down time. v1.8.0.13 (2020-01-23): - Updated compiler (reduced memory usage and code space); - Fixed incoherences with the cool-down timer; - Other minor fixes and improvements. v1.8.0.11 (2019-08-01): - Improved the water temperature sampling; - Improved the pH and EC sampling; - Improved manual buttons and universal switch inputs sampling; - Improved manual buttons handling. v1.8.0.10 (2019-03-26): - Skipped version 1.8.0.9; - Preparations for the new feature to control the modules’ LED; - Communication channel will reset to default if it gets out of bounds (1 to 5); - Improved temperature sampling. v1.8.0.8 (2017-12-05): - Implemented independent device Security Cooldown time to prevent rapid switching in sensitive devices (ex. HPS); - Improved module registration process; - Other minor fixes and improvements. v1.8.0.4: - Fixed calibration commands issues. v1.8.0.3: - Added security action when TankBot loses communication with GroNode for a while. v1.8.0.2: - Minor improvements and fixes. 1.9.0.15 9 http://grolabupdate.opengrow.pt/firmware/other-modules/tankbot/TankBotFirmware_H009_1.9.0.15.hex TankBotFirmware_H009_1.9.0.15.hex 3331D983B62E1D45CECFDAC51A529C59 v1.9.0.15 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), TankBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.9.0.14 (2020-04-17): - Added constraints to the Temperature sensor to reduce/remove potential false readings; - Fixed a minor bug related to the device's cool-down time. v1.9.0.13 (2020-01-23): - Updated compiler (reduced memory usage and code space); - Fixed incoherences with the cool-down timer; - Other minor fixes and improvements. v1.9.0.11 (2019-08-01): - Improved the water temperature sampling; - Improved the pH and EC sampling; - Improved manual buttons and universal switch inputs sampling; - Improved manual buttons handling. v1.9.0.10 (2019-03-26): - Preparations for the new feature to control the modules’ LED; - Communication channel will reset to default if it gets out of bounds (1 to 5); - Improved temperature sampling. v1.9.0.9 (2018-06-01): - Improved switch sensing; - Removed unnecessary debug messages; - Minor fixes and improvements. v1.9.0.8 (2017-12-05): - Implemented independent device Security Cooldown time to prevent rapid switching in sensitive devices (ex. HPS); - Improved module registration process; - Other minor fixes and improvements. 1.10.0.15 10 http://grolabupdate.opengrow.pt/firmware/other-modules/tankbot/TankBotFirmware_H010_1.10.0.15.hex TankBotFirmware_H010_1.10.0.15.hex AC827ACDD704F9D36B336B7810489CD6 v1.10.0.15 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), TankBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.10.0.14 (2020-04-17): - Added constraints to the Temperature sensor to reduce/remove potential false readings; - Fixed a minor bug related to the device's cool-down time. v1.10.0.13 (2020-01-23): - Updated compiler (reduced memory usage and code space); - Fixed incoherences with the cool-down timer; - Other minor fixes and improvements. v1.10.0.11 (2019-03-26): - Improved the water temperature sampling; - Improved the pH and EC sampling; - Improved manual buttons and universal switch inputs sampling; - Improved manual buttons handling. v1.10.0.10 (2019-03-26): - Preparations for the new feature to control the modules’ LED; - Communication channel will reset to default if it gets out of bounds (1 to 5); - Improved temperature sampling. v1.10.0.9 (2018-06-01): - Initial release. 1.11.0.15 11 http://grolabupdate.opengrow.pt/firmware/other-modules/tankbot/TankBotFirmware_H011_1.11.0.15.hex TankBotFirmware_H011_1.11.0.15.hex 0362596FE102DB6B6792EB8A1462EE23 v1.11.0.15 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), TankBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.11.0.14 (2020-08-17): - Initial release for TankBot Hardware 11. 1.1.0.7 1 http://grolabupdate.opengrow.pt/firmware/other-modules/ctrlbot/CtrlBotFirmware_H001_1.1.0.7.hex CtrlBotFirmware_H001_1.1.0.7.hex 249804D5A78FCD5D7058A4D668071952 v1.1.0.7 (2024-06-05): - Added defines for new sensor types; - Fixed action on devices resetting cooldown timer, causing it to never end; - Code cleanup; - Other minor changes and improvements. v1.1.0.6 (2023-06-15): - Added a new communication paradigm based on small frames (GroNode v1.0.7.4 or higher is required); - Added a new method to handle a timed action (Alarms/Schedules), if the active time is lower than 3600s (1Hour), CtrlBot will handle that active time directly (GroNode v1.0.7.4 or higher is required); - Improved ping command; - Improved firmware version comparison tools; - Changed security shutdown default timer to 5 minutes; - Fixed cooldown timer not properly initialized; - Code cleanup; - Other minor changes and improvements. v1.1.0.3 (2021-12-29): - Fixed LED blink not resetting after connection lost. v1.1.0.2 (2021-02-26): - Initial release for CtrlBot Hardware 1.